Other Details
Courses
-
Principles of Engineering Metallurgy
-
Materials Technology
-
Elements of Mechatronics
-
Process Planning and Cost Estimation
-
Foundry Engineering
-
Basic Mechanical Engineering
-
Fluid Power Control
-
Manufacturing Technology
Research Interests
-
Metal Matrix Composite in Stir Casting and Powder Metallurgy
-
Tribology
Selected Publications
-
Aatthisugan, I. and Rose, A.R., 2020, August. Microstructure and Mechanical Behaviour of AZ91d Magnesium Composite Reinforced With B4C and Graphite by Casting Process. In IOP Conference Series: Materials Science and Engineering (Vol. 912, No. 3, p. 032069). IOP Publishing.
-
Rose, A.R. and Aatthisugan, I., 2020, August. Fabrication and characterization of Magnesium Metal Composite by Stir Casting. In IOP Conference Series: Materials Science and Engineering (Vol. 912, No. 3, p. 032080). IOP Publishing.
-
Aatthisugan, I., Banerjee, A., Hasan, M.M., Patel, A.S., Pushkar, K., Dey, S., Sohail, S.B., Khateeb, S.M. and Das, A., 2020, August. Effect of Sintering Temperature on Microstructure and Mechanical Properties of Aluminium Composites. In IOP Conference Series: Materials Science and Engineering (Vol. 912, No. 3, p. 032070). IOP Publishing.
-
Jebadurai, D. Selwyn, A. Razal Rose, and I. Aatthisugan. "A Novel Approach to Enhance Mechanical Characteristics of Sandwich Composites." Materials Today: Proceedings 24 (2020): 618-627.
-
A. Rajendra Prasad,S K Dinesh Kumar,T.Vinithra Banu,T. Vignesh, I. Aatthisugan, 2019, September. "Synthesis and thermal energy storage analysis of copper oxide nano fluid for heat transfer applications" International Journal of Innovative Technology and Exploring Engineering , 8(11), pp. 3616-3619.
-
Aatthisugan, I., Muralidharan, S., Majumdar, S., Rose, A.R. and Jebadurai, D.S., 2018, August. Wear and mechanical properties of Al-6% Cu-X% Mg alloy fabricated by powder metallurgy. In IOP Conference Series: Materials Science and Engineering (Vol. 402, No. 1, p. 012106). IOP Publishing.
-
Muralidharan, S., Aatthisugan, I., Tripathi, A., Baradiya, H. and Singh, A., 2018, August. A study on machinability of polymer composite by abrasive water jet machining. In IOP Conference Series: Materials Science and Engineering (Vol. 402, No. 1, p. 012102). IOP Publishing.
-
Aatthisugan, Razal Rose A, Iruthayaraj R; Palani S, Shanmugan S. 2017, “Wear and Mechanical Properties of Aluminium Hybrid Composite (Al2024/Al2o3/Graphite) Fabricated by Powder Metallurgy”, International of Journal of Pure and Applied Mathematics, Vol.116 No.23, 231-236.
-
Aatthisugan, I., Vignesh Kumar, S., Razal Rose, A. and Selwyn Jebadurai, D. 2017, “Wear behavior of am60 magnesium alloy with different load and sliding distance”, International Journal of Mechanical Engineering and Technology 8(6), pp. 130-134.
-
Muralidharan, S., Karthikeyan, N., Kumar, A.L. and Aatthisugan, I. 2017, “A study on machinability characteristic in end milling of magnesium composite”, International Journal of Mechanical Engineering and Technology 8(6), pp. 455-462.
-
Aatthisugan, I., Rose, A.R. and Jebadurai, D.S., 2017, “Mechanical and wear behavior of AZ91D magnesium matrix hybrid composite reinforced with boron carbide and graphite”, Journal of Magnesium and Alloys, 5(1), pp.20-25.
-
Aatthisugan, I., Rose, A.R., Jebadurai, D.S. and Karthikeyan, R. 2017, “Wear and Mechanical properties of Aluminium hybrid composite (Al2024/B4C/Graphite) fabricated by powder metallurgy”, Journal of Chemical and Pharmaceutical Sciences ISSN, 974, p.2115.
-
Jebadurai, D.S., Rose, A.R., Aatthisugan, I. and Baby, B. 2017, “Implementation of 5S in sales warehouse”, Journal of Chemical and Pharmaceutical Sciences ISSN, 974, p.2115.
-
Rose, A.R., Aatthisugan, I., Jebadurai, D.S. and Cibie, R. 2017, “Experimental investigation on post welds heat treatment of TIG welded stainless steel joints”, Journal of Chemical and Pharmaceutical Sciences ISSN, 974, p.2115.
-
A. Razal Rose, D. Selwyn Jebadurai, I. Aatthisugan, D. Aravind, 2016, "Mechanical and metallurgical characterization of tig welded high-temperature materials", International Journal of Advances in Engineering Research, 11(1).
-
I. Aatthisugan, A. Razal Rose, D. Selwyn Jebadurai, 2016, "Tribological and mechanical behaviour of AZ61 magnesium alloy," International Journal of Advances in Engineering Research, 11(1).
Papers Presented
-
Presented a paper entitled “Tribological properties of stir cast processed magnesium self lubricating hybrid composites with B4C additions” in International Tribology Research Symposium held during 5th to 7th November 2020.
-
Presented a paper entitled “Microstructure and Mechanical Behaviour of AZ91d Magnesium Composite Reinforced with B4C and Graphite by Casting Process” in ICAME2020, SRM IST, Kattankulathur-603203, during 24th to 29th February, 2020.
-
Presented a paper entitled “Fabrication and characterization of Magnesium Metal Composite by Stir Casting” in ICAME2020, SRM IST, Kattankulathur-603203, during 24th to 29th February, 2020.
-
Presented research work entitled “Mechanical and wear properties of AZ91D magnesium hybrid composite reinforced with B4C and Graphite by squeeze casting process” in the Dr.Paarivendhar Research Colloquium organized by the Directorate of Research, SRM IST, Kattankulathur-603203 during 23rd to 25th september 2019.
-
Presented a paper titled “Mechanical and Wear properties of Aluminum hybrid composite (Al/TiC/Graphite) fabricated by powder metallurgy” in the 8th National Conference on Emerging Trends in Mechanical Engineering held on 9th March 2018.
-
Presented a paper entitled “Effect of process parameters on hardness of graphite reinforced aluminum composites” in the Research Day held on 1st March 2018 at SRM Institute of Science & Technology, Kattankulathur, Tamil Nadu.
-
Presented a paper entitled “Wear and Mechanical properties of Aluminum hybrid composite (Al/TiC/Graphite) fabricated by powder metallurgy” in the Research Day held on 1st March 2018 at SRM Institute of Science & Technology, Kattankulathur, Tamil Nadu.
-
Presented a paper entitled “Wear and Mechanical properties of Al95Mg5 aluminium matrix hybrid composite reinforced with silicon carbide and graphite” in the Research Day held on 1st March 2018 at SRM Institute of Science & Technology, Kattankulathur, Tamil Nadu.
-
Presented a paper titled “Wear and Mechanical properties of Aluminium Hybrid Composite” and has won SECOND place in the National conference on Modernisation, Dynamisation Mechanisation & Structuralisation held on 20th January 2017.
-
Presented a paper titled “Microstructure and Mechanical properties of Aluminium Hybrid Composite (Al2024/SiC/MoS2)” in the National conference on Modernisation, Dynamisation Mechanisation & Structuralisation held on 20th January 2017.
-
Presented a paper entitled “Material Behaviour and parametric characterization of two-step stir cast Magnesium composite” in the Research Day held on 28th February 2017 at SRM University, Kattankulathur, Tamil Nadu.
-
Presented a paper entitled “Wear behaviour of AM60 Magnesium alloy with different load and sliding distance” in a national conference on Advances in Materials and Manufacturing Techniques (NCAMMT’17) held at SRM University, Vadapalani campus.
-
Presented a paper titled “Experimental Investigation on Post welds heat treatment of TIG welded stainless steel joints” in Second International Conference on Emerging Trends in Engineering and Technology, INCETET 2016, 8th May 2016.
-
Presented a paper titled “Wear and Mechanical behavior of Aluminium hybrid composite(Al2024/B4C/Graphite) fabricated by powder metallurgy”, International Conference on Mechanical and Building Sciences (ICMBS 2016), held on 23rd & 24th March at SNS College of Technology, Coimbatore, 2016.
-
Presented a paper titled “Tribological and Mechanical behavior of AZ61 Magnesium alloy” in an international conference on Emerging Trends in Engineering and Technology INCETET 2015, 5th December 2015.
-
Presented a paper titled “Mechanical and Metallurgical characterization of TIG welded high-temperature materials” in an international conference on Emerging Trends in Engineering and Technology INCETET 2015, 5th December 2015.
-
I.Aatthisugan, “Wear and Mechanical behavior of AZ61 Magnesium alloy Fabricated by Powder Metallurgy” in a national conference held at Government College of Engineering, Tirunelveli on 27th February 2013.
-
I.Aatthisugan, “Transient Thermal Analysis of welding in steel pipes and plates using Finite Element Analysis Method” in a national conference held at Dr.Sivanthi Aditanar College of Engineering, Tiruchendur on 25th March 2011.
Working Papers
Work in Progress
Academic Experience
-
Assistant Professor, SRM Institute of Science and Technology (formerly known as SRM University)-Kattankulathur since 24th June 2013 to till date
Workshops/Seminars/Conferences
-
Participated in the webinar on “Microstructure and Texture Analysis of High Entropy Alloys” on 26th June 2020, organized by Department of Mechanical Engineering, SCAD College of Engineering and Technology, Cheranmahadevi.
-
Participated in the webinar on “Micro Contact Behavior of Rough Surfaces” on 23rd June 2020, organized by Department of Mechanical Engineering, SCAD College of Engineering and Technology, Cheranmahadevi.
-
Aattended the Five days online Faculty Development Program on “Manufacturing, Machining and Testing of Composites” organized by Department of Mechanical Engineering at Sri Sai Ram Institute of Technology from 15.06.2020 to 19.06.2020.
-
Participated in an online webinar on “Trends in the Industry and COVID related updates” on 3rd June 2020, organized by Department of Mechanical Engineering, SRMIST, Kattankulathur – 603203.
-
Participated in the webinar on “Wheeled Mobile Robots” on 1st June 2020, organized by Department of Mechanical Engineering, SCAD College of Engineering and Technology, Cheranmahadevi.
-
Participated in an online webinar on “Insights into Surface Roughness Measurement” on 29th May 2020, organized by Department of Mechanical Engineering, SRMIST, Kattankulathur – 603203.
-
Participated in the two days “National Level Virtual Workshop on Advanced Materials Characterization Tool” held on 20-21st May 2020 at SRM Institute of Science & Technology, Kattankulathur.
-
Participated in an online webinar on “How to Get Published in Scientific Journal: From Research to Publication “ on 27/04/2020 hosted by MHRD – Institute Innovation Council – Sri Sai Ram Institute of Technology, Chennai -44, Tamilnadu.
-
Participated in an online webinar on “Research Article writing” from 23rd to 24th April 2020 hosted by SRMIST, Kattankulathur – 603203.
-
Attended the Two days workshop on Composites during February 24th – 25th, 2020 conducted by Department of Mechanical Engineering, SRM IST, Kattankulathur-603203.
-
Attended and coordinated two days workshop on “Recent Trends in Metal Additive Manufactureing” during 21st – 22nd November 2019 conducted by Department of Mechanical Engineering, SRM IST, Kattankulathur, Chennai-603203.
-
Participated three days certificate course on Crystallography and Crystallographic Texture conducted during 16th – 18th of september, 2019 by Department of Mechanical Engineering, SRM IST, Kattankulathur, Chennai-603203.
-
Attended and coordinated two days workshop on “Stir Casting and Solid State Welding” during July 29th – 30th, 2019 conducted by Department of Mechanical Engineering, SRM IST, Kattankulathur, Chennai-603203.
-
Participated in the workshop on “X-Ray Photoelectron Spectroscopy: Basics to Scientific Research” organized by Nanotechnology Research Center (NRC), SRM IST on 24th April 2019.
-
Attended and Coordinated the Two days workshop on “Design of Experiment (DOE)” during February 07th – 8th, 2019 conducted by Department of Mechanical Engineering, SRM IST, Kattankulathur-603203.
-
Attended and Coordinated the short term course on “Composite Materials: Theory and Applications (CMTA’18) held during January 04th – 11th, 2018 conducted by Department of Mechanical Engineering, SRM IST, Kattankulathur-603203.
-
Participated in one day Faculty Development Program on “Intellectual Property Rights and Industrial Applications” held on November 8th, 2017 conducted by MEA, Department of Mechanical Engineering, SRM University, Chennai.
-
Participated in (May 19th, 2017) one day Faulty Development Program on “Micro and Nano Manufacturing (MNM 2017)” conducted by Department of Mechanical Engineering, SRM University, Chennai.
-
Participated in six days Faulty Development Program on “Mechanical Behavior of Structural Materials” conducted by Department of Mechanical Engineering, SRM University, Kattankulathur, India from 12th May to 18th May, 2017.
-
Participated in short term course on “Development, Manufacturing and Analysis of Advanced Composites (DMAAC’16) held during 19 Dec to 24 Dec, 2016 conducted by Department of Mechanical Engineering, SRM University, Chennai.
-
Participated in the two days short Course on “Mechanics of Composite Materials and Structures” organized by Department of Mechanical Engineering, SRM University on 21 & 22 December 2015.
-
Participated in the workshop on “Development Manufacturing and Analysis of Advanced Composites” organized by Department of Mechanical Engineering, SRM University on 19th December 2015.
-
Participated two-day workshop on “Recent Trends in Mechatronics” in College of Engineering Guindy during 26 & 27 February 2015.
-
Participated in Refresher Course on Advances in Frontier Areas of Materials Science organized by the Department of Physics and Nanotechnology, SRM University during 23-24 January 2014.
Achievements and Awards
-
Delivered an invited talk webinar on “Development of Magnesium Matrix composite through stir casting process” on 28th May 2020, in SNS College of Technology, Coimbatore, Tamilnadu.
-
Coordinator for Short Term Course on Composite Materials: Theory and Applications (CMTA’18) January 04-12, 2018. (Course Faculty: Prof. Debes Bhattacharyya)
-
Won SECOND place for the Presented a paper titled “Wear and Mechanical properties of Aluminium Hybrid Composite” in the National conference on Modernisation, Dynamisation Mechanisation & Structuralisation held on 20th January 2017.
-
Reviewer for research articles of the SAGE journal “Journal of Composite Materials”.
-
Reviewer for research articles of the journal “International Journal of Materials Research”.
-
As a Guest of Honor and External Judge for the National level conference ACDM’2015, conducted by the Department of Mechanical Engineering of SCAD CET on 18.03.2015.
Memberships
-
Member in Indian Science Congress Association (ISCA), 2013.
-
Member in International Association of Engineers (IAENG), 2018.
|