Mr.J.Thavamani
Mr. J. Thavamani

Assistant Professor 
Area: Mechanical Engineering, Fluid Mechanics & Refrigeration and Air conditioning, CFD Two phase flow analysis

Affiliation: Department of Mechanical Engineering, Kattankulathur Campus, SRM Institute of Science and Technology (formerly known as SRM University)
Email: thavamaj@srmist.edu.in

Education
M.E Mechanical Engineering College of Engineering, Guindy/Anna University, 2009
B.E Mechanical Engineering  ACCET, Anna University, 2005

Other Details:

Course

  • Air Conditioning System Design
  • Refrigeration Design.
  • Thermodynamics
  • Fluid Mechanics
  • Heat and Mass Transfer
  • Basic Mechanical Engineering
  • Engineering Graphics
  • Thermal engineering
  • Manufacturing and assembly drawing 

Research Interests

  • Heat Transfer
  • Alternative Refrigerants
  • CFD two phase flow

Selected Publications

  • Thavamani.j, “Synthesizing and characterization of Perovskite solar cells from recycled car batteries” Journal of Chemical and Pharmaceutical Sciences, 669-672 , JCPS Volume 9 Issue 1,2016
  • Thavamani.j “performance and evaluation of piercing punch coated with tialn” international archive of applied sciences and technology [IAAST],  Vol 7 [1] March 2016.
  • J. Thavamani et al., “performance of deep freezer by using hydrocarbon blends as refrigerants. international journal of chemical science,Volume14(S2), PP 665-674, Accepted : 01.07.2016
  • J.Thavamani et al., “Experimental and CFD analysis of Shell and tube heat exchanger, Journal of Chemical and Pharmaceutical Sciences, volume 10,PP 84 -86, January - March 2017
  • J.Thavamani et al, “The effect of magnesium addition in micro hardness and thermal conductivity of aluminium alloy” Journal of Advanced Research in Dynamical and Control Systems, issue 18, PP 1937-1944, 2017.
  • J.Thavamani  "Performance Analysis of Shell and Tube Heat Exchanger using Different Nano fluids”, International Journal of Vehicle Structures and Systems 11(4) • December 2019   DOI: 10.4273/ijvss.11.4.25
  • J.Thavamani. Senthil, Performance analysis of retrofitted domestic vapour compression refrigeration system using hydrocarbon refrigerants, International Journal of Ambient Energy, https://doi.org/10.1080/01430750.2020.1751284
  •  Thavamani j,Kumar P, Numerical investigation of flow boiling characteristics of water in a rectangular microchannel, Journal of thermal analysis and Calorimetry, 2020:1-20,https://doi.org/10.1007/s10973-020-10231-x.

Papers Presented

  • Krishnan N, Babu C.N.K, Ravi S, Thavamani. J, “Segmentation of Text from Compound Images”, International Conference on Computational Intelligence and Multimedia Applications, 2007, ISBN: 0-7695-3050-8, pp: 526-528
  • International Conference  J. Thavamani, M. Herbert Raj, and D. Mohan Lal “Performance Comparison of Domestic Refrigerator using HFC134a and HFC134a/HC Refrigerant Mixture” .Proceedings of the 2010 International Conference on Industrial Engineering and Operations Management Dhaka, Bangladesh, January 9 – 10, 2010

Working Papers

  • J. Thavamani,  Kumar Pankaj , Numerical investigation of flow boiling inside micro channel”
  • J.Thavamani, Kumar Pankaj, Performance analysis of double slope solar still

Work in Progress

  • J. Thavamani,  Kumar Pankaj ,”Experimental and Numerical investigation of flow boiling inside microchannel”
  • J.Thavamani, Kumar Pankaj, Experimental analysis of double slope solar still under the Chennai climatic conditions 

Academic Experience

  • Lecturer, Srineevasan Engineering College, Anna University 2006 to April 2007
  • Assistant professor, Mechanical department, SRM University 03/July /2009 to till date.

Other Professional Experience

  • Participated in the Summer Camp “ACREX” conducted by International Air Conditioning and Refrigeration Organization in Bangalore- January 2008
  • Industrial training visited “AIR COOLER APPLIANCES” Chennai- June 9thto July9th 2008
  • Assisting” National Conference on Advances in Mechanical Engineering (NCAME - 2016) Organized by Department of Mechanical Engineering Date: April 29, 2016 Venue: Mechanical Seminar Hall - MEB 206

Workshops/Seminars/Conferences

  • Krishnan N, Babu C.N.K, Ravi S, Thavamani. J, “Segmentation of Text from Compound Images”, International Conference on Computational Intelligence and Multimedia Applications, 2007, ISBN: 0-7695-3050-8, pp: 526-528
  • Marripudagala komali1 Thavamani.J2 Kukkadapu Radha Krishna Manoj3 Shaik Mazharuddin4 , ‘ Analysis of Hydrocarbon blends as refrigerants in Deep Freezer” National Conference on Advances in Mechanical Engineering (NCAME - 2016) Organized by Department of Mechanical Engineering Date: April 29, 2016 Venue: Mechanical Seminar Hall - MEB 206
  • Geethapriyan.T, Prakash .M, Mohammed Iqbal.U, Thavamani.J, Vignesh hariharan srinivasan, “ Process efficiency of electrochemical micromachining on A-titanium Using NI coated Tool Electrode”  Proceedings of the International Conference on Technological Advances in Mechanical Engineering (ICTAME 2017) on 22nd September 2017 organized by Department of Mechanical Engineering, AMET University,Chennai,India.
  • Thavamani.j ,T.geethapriyan, Pakash.M,Abhishek P Diwan, Surya Ram, “ The effect of magnesium addition in micro hardness and thermal conductivity of aluminum alloy” Proceedings of the International Conference on Technological Advances in Mechanical Engineering (ICTAME 2017) on 22nd September 2017 organized by Department of Mechanical Engineering, AMET University,Chennai,India..
  • G. Kasiraman, V. Rajasekar, J. Thavamani,  “Low emission novel biodiesels –A feasibility study on direct injection CI Engine” ICAME-2018, MARCH 22-24, 2018, organized by Department of Mechanical Engineering, SRM IST.
  • T. Geethapriyan* J. Thavamani R. Manoj Samson A. C. Arun Raj Bharadwaj Reddy Pulagam , “Experimental Investigation of Electro Chemical Micro Machining Process Parameters on Stainless Steel-316 using Sodium Chloride Electrolyte” Proceedings of the International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), 15-16 February 2018.
  • T. Geethapriyan  T. Muthuramalingam, S Vasanth, J. Thavamani, Vignesh Hariharan Srinivasan, “Influence of Nanoparticles Suspended Electrolyte on machinability of Stainless Steel 430 using Electrochemical Micro Machining Process” Proceedings of the International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), 15-16 February 2018
  • Participated in the five day Intensive training in COMPUTATIONAL FLUID DYNAMICS (CFD) Organized by the school of Mechanical and Building Sciences (SMBS),VIT Chennai from 16 th June to 20 th June ,2014
  • Participated in the five day Faculty development program on “Short Term Course on Development, Manufacturing and Analysis of Advanced Composites (DMAAC’16) December 14-20, 2016” conducted by Department of Mechanical Engineering, SRM University, Chennai.
  • Participated in the five day Faculty development program on “MICRO AND NANO MANUFACTURING (MNM2017)” Held on May 19th2017 conducted by Department of Mechanical Engineering, SRM University, and Chennai.
  • Participated in the one-day Faculty development program on “INSIGHTS INTO RESEARCH” Held on June 29th2017 conducted by Department of Mechanical Engineering Association , SRM University, and Chennai-603203.
  • Participated in one day Faculty development program on “INTELLECTUAL PROPERTY RIGHTS AND INDUSTRIAL APPLICATIONS ” Held on November 8th2017 conducted by Mechanical Engineering Association, Department of Mechanical Engineering , SRM University, Kattankulathur, Chennai-603203
  • Participated in one day Faculty development program on “EXPLORING PATENT FILING ASPECTS” Held on December 04th2017 conducted by Mechanical Engineering Association, Department of Mechanical Engineering , SRM Institute of science and Technology, Kattankulathur, Chennai-603203.
  • Participated in one day Faculty development program on “RESEARCH PERSPECTIVES IN IC ENGINES” Held on December 06th2017 conducted by Mechanical Engineering Association, Department of Mechanical Engineering , SRM Institute of science and Technology, Kattankulathur, Chennai-603203
  • Participated in Short Term Course  on “MICROMACHINING” Organized by the Department of Mechanical Engineering , SRM Institute of science and Technology, Kattankulathur, Chennai-603203, between 20th-27th November 2017
  • Participated in  the CSIR Sponsored National Level Workshop on “RECENT DEVELOPMENT IN RENEWABLE ENERGY TECHNOLOGIES” Organized by the Department of Mechanical Engineering, SRM Institute of Science and Technology, Ramapuram  campus, , between 27th-29th September 2018
  • ELOPMENT IN RENEWABLE ENERGY TECHNOLOGIES” Organized by the Department of Mechanical Engineering, SRM Institute of Science and Technology, Ramapuram  campus, , between 27th-29th September 2018.
  • Thavamani. J, “ Study the effect of Nanoparticles on heat transfer and fluid flow in Micro channels” in the Dr.Paarivendhar Research Colloquium organized by the Directorate of Research, SRM Institute of Science and Technology, Kattankulathur-603203 during 23 rd to 25 th September 2019
  • Participated in Faculty development program on  " RECENT ADVANCES IN SOLAR ENERGY RESEARCH" Organized by the department of Mechanical Engineering from 25th November to 29 November 2019
  • I have participated in online Faculty Development Program on “Renewable Energy Sources”: A way Ahead Organized by Department of mechanical Engineering in association with ASM international (American Society of Materials) Pune Chapter and ISHRAE (The Indian Society of Heating, Refrigerating and Air Conditioning Engineers) Nagpur chapter during 15 May 2020 to 21 May 2020.
  • I have completed the “Faculty Awareness Programme on NBA to keep in touch with NBA Accreditation” organised by Internal Quality Assurance Cell(IQAC), PACE Institute of Technology and Sciences, Ongole on 17/05/2020.
  • I have successful completion of “Virtual assessment program on Awareness about Alternative Fuels Research” organized by Department of Mechanical Engineering, Aarupadai veedu Institute of Technology (AVIT), Chennai conducted online on 19/05/2020.
  • I have participated in webinar on “An Introduction of Solar Thermal Energy Storage” by Dr.R.Senthil, Professor, SRM Institute of science and Technology, Chennai held on May 19, 2020 during a one week webinar series Organized by Department of Mechanical Engineering, Anand Engineering College, Agra-282007
  • I have participated in webinar on “An Introduction of Electrical Discharge Machining (EDM)” by Dr.Anand Pandey, Professor, Manipal University, Jaipur held on May 20, 2020 during a one week webinar series Organized by Department of Mechanical Engineering, Anand Engineering College, Agra-282007
  • I have participated in webinar on “Innovations in solar Energy" By Dr.C.S Malvi, Professor, MITS Gwalior held on May 21, 2020 during a one week webinar series Organized by Department of Mechanical Engineering, Anand Engineering College, Agra-282007
  • I have participated in webinar on “Additive Manufacturing” by Dr.Rahul Swaroop Sharma, Professor, Dayalbagh Educational Institute, Agra held on May 22, 2020 during a one week webinar series Organized by Department of Mechanical Engineering, Anand Engineering College, Agra-282007
  • I have participated in webinar on “Basics of chilled water Air-conditioning system)” byMr.Sumit Kumar, Project Engineer, Avant Garde Clean Room and Engg.Solutions Pvt.Ltd held on May 23, 2020 during a one week webinar series Organized by Department of Mechanical Engineering, Anand Engineering College, Agra-282007.
  • I have attended the online lecture on “Leadership in Engineering and Creative thinking” presented by R.ROOBAN ANNMALAI Delivery Partner (Governance) for Zensar Technologies at Christie's-UK and USA organized by Department of Mechanical Engineering of RMK college of Engineering and Technology in association with ISTE Chapter on 26.05.2020
  • I have participated in a Technical Webinar on “Recent trends in Global Automotive Sectors” Presented by Mr.Archisman Sen, Politechico Di Milano, Italy, organized, Department of Mechanical Engineering, SRM Institute of Science and Technology, Kattankulathur campus, Chennai from 26 May, 2020.
  • I have participated in the five days Online Faculty Development Program on “Advanced Energy Conversion Technologies” organized by Thermal Division, Department of Mechanical Engineering, SRM Institute of Science and Technology, Kattankulathur campus, Chennai from 27th – 31st May, 2020.
  • I have participated in online Faculty Development Program on “Computational fluid dynamics and Engineering simulations”: A way Ahead Organized by Department of mechanical Engineering during 05 June 2020 to 07 June 2020.
  • I have participated in webinar on “Recent advancements in latent heat based thermal energy storage system” Organized by school of Mechanical Engineering, sathyabama Institute of science and technology, Chennai on 5th June 2020.
  • I have actively participated in online sessions at the WEBINAR SERIES on “Experiences in Solar Energy: Challenges & Opportunities” organized by Pimpri Chinchwad College of Engineering (PCCOE, Pune) In association with School of Energy Studies, Savitribai Phule Pune University from 8th to 13th June 2020.
  • I have actively participated in the webinar “Humidity control in HVAC system” organized by ISHRAE Coimbatore Chapter on 13th June 2020.
  • I have actively participated in the webinar “ Methodology to improve the efficiency of existing AHUs” delivered by Mr. S.Ashok Vice president, Indian Association of Energy Management Professionals, organized by ISHRAE Coimbatore Chapter on 27 th June 2020.
  • I have completed on line “Introduction to Thermodynamics: Transferring Energy from Here to There” university of Michigan, and offered through courser on 16/06/2020.
  • I have participated in online Webinar Faculty Development Program on “Industrial approach on Fatigue Testing in Product Development Process”: A way Ahead Organized by SRMIST,Automobile department on 28 th September 2020.
  • I have participated in online Webinar Faculty Development Program on “Smart materials, Automation and its future impact on humans(Part1)SAFIH 2020”, Department of mechanical engineering, Sree Buddha college of engineering, Pattoor P.O/Nooranad/Alappuzha APJ Abdual Kalam Technological University, on 12 th to 17 th  October, 2020.
  • I has participated in online Webinar on “CFD IN TURBOMACHINERY INDUSTRY” Organized by the Department of Aerospace Engineering, SRM Institute of Science and Technology, Kattankulathur, Chennai in association with SAE SRM Aerospace Collegiate Club, on 30th October 2020.
  • I have participated in online Webinar Faculty Development Program on “Renewable Energy in Indian Universities Solar energy: An Agent of change series 2”: A way Ahead Organized by Solar Energy Society of India, on 06 th September 2020.
  • I have participated in online Webinar Faculty Development Program on “Smart manufacturing” Organized by  School of Mechanical Engineering and school of Electrical ,Electronics and communication Engineering, Galgotias University, Greater Noida,Uttar Pradesh, on 08th September 2020.
  • I has participated in online Webinar on “Awareness of National Education Policy 2020” Organized by Unnat Bharat Abhiyan cell, SRM Institute of science and technology kattankulathur - 603202, Tamilnadu, held on 21 st September 2020.
  • I has participated in the six days online Faculty development program on “Advances in fluid flow and heat transfer” Organized by Department of mechanical engineering, SRM Institute of science and technology Kattankulathur - 603202, Tamilnadu, held on February 15-20,2021
  • Coa Shipyard and Bio mass power plant on 01-04 January 2018
  • Diamond Engineering Chennai Private Limited on 07 September 2018

Achievements and Awards

  • First Prize for Paper Presentation at International Conference, ICCIMA, 2007
  • Completed Online course in Introduction to Thermodynamics-Transferring Energy from Here to There', on June 2, 2015, at the University of Michigan, with 99.2% grade
  • Completed Online course in Organic Solar Cells-Theory and Practise on August 5, 2014, Technical Unviersity of Denmark, (DTU), with 79.5% grade
  • Best Project Award from Tamil Nadu State Council for Science and Technology

Memberships

  • Member in Indian Science Congress Association (ISCA), 2010, membership No: A7089
  • The institution of Engineers (India) Membership Number AMI187941-6
  • Solar Energy Society of India (SESI).Membership No LM/2426/2020
 

 

 

 

 

 

 

 

 

 

 

Dr.A.Thilagaraj
Dr. A. Thilagaraj

Assistant Professor (Sr. G)

Mail ID: thilagaa@srmist.edu.in
Area:
Commerce
Affiliation: Department Of Corporate Secretaryship and Accounting & Finance, Faculty of Science & Humanities, SRM Institute of Science and Technology (formerly known as SRM University) Kattankulathur.

 

Education
Ph.D.
Commerce
 
Madurai Kamaraj University, 2009
 
M.Phil.
Commerce

Madurai Kamaraj University, 1997

M.Com Commerce

Madurai Kamaraj University, 1995

MBA Marketing

Madurai Kamaraj University, 2010

MBA Finance

Periyar University, 2012

PGDMM Marketing

Annamalai University, 1998

B.Com Commerce

Madurai Kamaraj University, 1993

Other Details:

Selected Publications

  • Floriculture – A Blooming Time Kisan World Nov.’2009 0971-9229
  • Higher Education: Demands of a Knowledge economy University News Dec. ‘ 2010 0566-2257
  • Green Revolution – for Nation’s Economy Kisan World April’ 2009 0971-9229
  • Aviation Industry: Low cost carriers driving the growth Facts for You June’ 2010 0970-2652
  • Litchi:  High Potential for this favoured fruit Facts for You January’ 2011 09702-652
  • Edible oils: Demand-Supply gap continues Facts for You Feb.’ 2010 0970-2652
  • Co-operative Marketing in India an overview Tamil Journal of Co-operation Sep.’ 2009
  • Milk production in India: an Overview Kisan World Feb.’ 2011 0971-9229
  • IT Industry: Performance and Future Facts for You Dec.’ 2010 0970-2652
  • Turmeric: The Golden Spice Facts for You April’ 2009 0970-2652
  • Solar Energy Kisan World May’2010 0971-9229
  • Export Trade: An Outlook Facts for You Sep.’ 2009 0970-2652
  • Child Labour in India – A Road Ahead Kisan World April’ 2010 0971-9229
  • Steel: Potential Untapped Facts for You March’ 2010 0970-2652
  • Tourism – A Potential Game Changer Indian Journal of Applied Research December’ 2015 2249-555X Impact Factor:3.6241
  • An Overview of Flood Management ZENITH International Journal of Multidisciplinary Research January’ 2016 2231-5780 Impact Factor:3.25
  • Go Green – ‘Let’s Green the Plant’ International Journal in Management and Social Science January’ 2016 2321-1784 Impact Factor:4.358
  • Tool for Marketing CRM Reader Shelf April’ 2008
  • A study on quality analysis of selective oil corporation SMART Journal of Business Management Studies Jan.-June’ 2012
  • Customer satisfaction towards mobile banking –A Study Indian journal of applied research Feb 2018 2249-555X

Publication of Books:

  • Introduction to Statistics, 2008
  • Business Mathematics, 2010

Papers Presented

  • E-Commerce Sustainable tool in today’s Context VHNSN College 2407.2015
  • Human Rights & Women Employment VHNSN College 19.12.2015
  • Make in India – Boon to Manufacturing Sector Quaide Milleth College 7.1.2016
  • LPG and the challenging Face on Human Resource Annai Mathammal Sheela College 26.02.2011
  • Study on Equity analysis of Selected oil companies Bharathidasan University 8.1.2011
  • Role of Microfinance in Poverty Deduction Pondicherry University 27.01.2011
  • A study on Perception of the employees relating to the job satisfaction @ standard fireworks SRM University 28.02.2013
  • Corporate spinoff – A risk and return Karpagam University 24.09.2009
  • Human Rights – Robust Roles VHNSN College 7.8.2008
  • Global retail industry – The way for retail future Nehru Institute 8.10.2010
  • Role of government in the development of rural entrepreneurship St.Xavier’s College 26.02.2010
  • The role of government in transnalization efforts of Indian SME’s VHNSN College 22.02.2010
  • Indian corporate government system – A key instrument Ayya Nadar Janaki Ammal College 5.2.2010
  • The Corporate governance the financial crises Ayya Nadar Janaki Ammal College 5.2.2010
  • Impact of CRM in business sector Acharya Institute 12.2.2012
  • Microfinance institutions in India VHNSN College 6.1.2011
  • E-Learning:  Trend and emerging Technologies RVS Institute, Coimbatore 28.01.2011
  • Analysis of employee’s job satisfaction of public and private sector cement industry in Virudhunagar district SFR College 4.8.2009
  • Role of economic development Rural Entrepreneur Yadava College 10.02.2010

Academic Experiences

  • Sri. S.Ramaswamy Naidu Memorial College September 1997 to December 2010 13 years and 6 months
  • College of Business Management December’ 2010 to June’ 2011 6 months
  • SRM IST July’ 2011 to till date

 

 

Pages