Dr. T. Muthuramalingam

Dr.T.Muthuramalingam
Dr. T. Muthuramalingam

Associate Professor

Email ID: muthurat@srmist.edu.in
Area: Mechatronics   
Affiliation: Department of Mechatronics Engineering, Kattankulathur Campus, SRM Institute of Science and Technology (formerly known as SRM University)

Education

Ph.D Mechanical Engineering Anna University, 2013
ME Mechatronics

Anna University, 2008

BE Electrical and Electronics Engineering

Anna University, 2006

Other Details

Courses

  • Drives and Actuators
  • Multi disciplinary design
  • Intelligent Manufacturing Technology;
  • Fluid power drives and control
  • PLC and data acquisition Systems
  • Electrical Drives and control
  • Power Electronics
  • Sensors and Signal Conditioning

Research Interests

  • Unconventional Micro Machining
  • Manufacturing Automation
  • Process Optimization and Design of Experiments,
  • Energy Conservation.

Research Forum Links

Selected Publications

  • T Muthuramalingam, D. Saravanakumar, L. Ganesh Babu, Phan Nguyen Huu, Vu Ngoc Pi, “Experimental investigation of white layer thickness on EDM processed silicon steel using ANFIS approach,” Silicon, Accepted for publication, 2019.
  • Shoufa Liu, Yinwei Wang, T Muthuramalingam, G. Anbuchezhiyan, “Effect of B4C and MOS2 reinforcement on micro structure and wear properties of aluminum hybrid composite for automotive applications,” Composites Part B: Engineering, 176, 107329, 2019.
  • Luu Anh Tung, Tran Thi Hong, Nguyen Van Cuong, Le Hong Ky, T Muthuramalingam, Nguyen Huu Phan, Le Xuan Hung, and Ngoc Pi Vu, “A Study on Optimization of Manufacturing Time in External Cylindrical Grinding,” Lecture Notes in Networks and Systems: Advances in Engineering Research and Application, 104, 487-492, 2020. doi: 10.1007/978-3-030-37497-6_14
  • T Muthuramalingam, L Ganesh Babu, K Sridharan, T Geethapriyan, K P Srinivasan, “Multi-response Optimization of Process Parameters of Inconel 718 Alloy using TGRA Method,” Lecture Notes in Networks and Systems: Advances in Engineering Research and Application, 104, 121–129, 2020. doi: 10.1007/978-3-030-37497-6_56
  • Nguyen Huu Phan, Nguyen Van Duc, Pham Van Bong, T Muthuramalingam, Ngoc Pi Vu, Le Xuan Hung, “Multi-responses Optimization of Process Parameters in Die-Sinking EDM Process on SKD11 Steel Using PSI Based Taguchi Method,” Lecture Notes in Networks and Systems: Advances in Engineering Research and Application, 104, 493–499, 2020. doi: 10.1007/978-3-030-37497-6_57
  • Luu Anh Tung, Tran Thi Hong, Nguyen Van Cuong, Le Hong Ky, T Muthuramalingam, Do Duc Trung, Le Xuan Hung, Ngoc Pi Vu, “Optimization of Manufacturing Time in Surface Grinding,” Lecture Notes in Networks and Systems: Advances in Engineering Research and Application, 104, 566-574, 2020. doi: 10.1007/978-3-030-37497-6_64
  • Huu Phan Nguyen, Tien Long Banh, T Muthuramalingam, Ngoc Pi Vu, Quang Dung Le, Le Xuan Hung, Dinh Khai Nguyen “Taguchi Based Process Parameters Optimization in Vibration Assisted Die Sinking Electrical Discharge Machining,” Lecture Notes in Networks and Systems: Advances in Engineering Research and Application, 104, 704-709, 2020. doi: 10.1007/978-3-030-37497-6_81
  • S Vishnukumar, NR Sibi, R Balamurugan, S Vasanth, T Muthuramalingam, “Machine ability on Leather using CO2 Laser and Power Diode Laser,” International Journal of Engineering and Advanced Technology, 8(5S3), 151-154, 2019.
  • T Muthuramalingam, L. Ganesh Babu, Atif Akthar, P. Srinivasan, “Multi Response Optimization on Machining Titanium Alloy Using Taguchi-DEAR Analysis in Abrasive Water Jet Cutting,” SAE Technical Paper, 2019-28-0070, 2019.
  • R Mathiyazhagan, S Sampathkumar, T Muthuramalingam, “Prediction Modeling of Surface Roughness using Capacitive Sensing Technique in Machining Process,” IEEE Sensors, 19(21), 9997 - 10002, 2019
  • Cao Fenghong, Chen Chang, Wang Zhenyu, T Muthuramalingam, G Anbuchezhiyan, “Effects of Silicon Carbide and Tungsten Carbide in Aluminium Metal Matrix Composites,” Silicon, Accepted for publication, 2019.
  • T Muthuramalingam, “Effect of diluted dielectric medium on spark energy in green EDM process using TGRA approach,” Journal of Cleaner Production, 238, 117894, 2019.
  • T Geethapriyan, T Muthuramalingam, K Kalaichelvan, “Influence of Process Parameters on Machinability of Inconel 718 by Electrochemical Micromachining Process using TOPSIS Technique,” Arabian Journal for Science and Engineering, 44(9), 7945–7955, 2019.
  • Jiaofei Huo, Shoufa Liu, Yinwei Wang, T Muthuramalingam, Vu Ngoc Pi, “Influence of process factors on surface measures on electrical discharge machined stainless steel using TOPSIS,” Materials Research Express, 6(8), 086507, 2019.
  • T Muthuramalingam, “Measuring the influence of discharge energy on white layer thickness in the electrical discharge machining process,” Measurement, 131, 694-700, 2019.
  • T Muthuramalingam, A Ramamurthy, K Sridharan, S Ashwin,  “Analysis of surface performance measures on WEDM processed titanium alloy with coated electrodes,” Materials Research Express, 5(12), 126503, 2018.
  • P Nanthakumar, A Rajadurai, T Muthuramalingam, “Dynamic Mechanical Analysis of Sub-micron Size Flyash Particles Filled Polyester Resin Composites,” Lecture Notes in Mechanical Engineering: Advances in Materials and Metallurgy, 199–205, 2018. doi:10.1007/978-981-13-1780-4_20
  • G Anbuchezhiyan, B Mohan, T Muthuramalingam, “Synthesis and Characterization of Nano-Glass Particles Reinforced AZ91D Magnesium Alloy Composites,” Lecture Notes in Mechanical Engineering: Advances in Materials and Metallurgy, 39–45, 2018. doi:10.1007/978-981-13-1780-4_5
  • S Vasanth, T Muthuramalingam, “A Study on Machinability of Leather Using CO2-Based Laser Beam Machining Process,” Lecture Notes in Mechanical Engineering: Advances in Manufacturing Processes, 239–244, 2018. doi:10.1007/978-981-13-1724-8_23
  • A Ramamurthy, T Muthuramalingam, “Analysis of Machinability on WEDM Processed Titanium Alloy with Coated Electrodes,” Lecture Notes in Mechanical Engineering: Advances in Manufacturing Processes, 279–285, 2018. doi:10.1007/978-981-13-1724-8_27
  • T Geethapriyan, T Muthuramalingam, S Vasanth, J Thavamani, VH Srinivasan,  “Influence of Nanoparticles-Suspended Electrolyte on Machinability of Stainless Steel 430 Using Electrochemical Micro-machining Process,” Lecture Notes in Mechanical Engineering: Advances in Manufacturing Processes, 433–440, 2018. doi:10.1007/978-981-13-1724-8_42
  • G Anbuchezhiyan, T Muthuramalingam, B Mohan, “Effect of process parameters on mechanical properties of hollow glass microsphere reinforced magnesium alloy syntactic foams under vacuum die casting,” Archives of Civil and Mechanical Engineering, 18 (4), 1645-1650,  2018.
  • U Jayakrishnan, Ikshit Sanghrajka, S Manikandakumar, T Muthuramalingam, Moshe Goldberg, Guy Littlefair, “Optimisation of multiple response characteristics on end milling of Aluminium alloy using Taguchi-Grey relational approach,” Measurement, 124, 291–298, 2018.
  • P Nanthakumar, A Rajadurai, T Muthuramalingam, “Thermal and mechanical behaviour of sub micron sized fly ash reinforced polyester resin composite,” Materials Research Express, 5(4), 045303, 2018.
  • D Saravanakumar, B Mohan, T Muthuramalingam, G Sakthivel, “Performance Evaluation of Interconnected Pneumatic Cylinders Positioning System,” Sensors & Actuators: A. Physical, 274(1), 155-164, 2018.
  • M Manoj, GR Jinu, T Muthuramalingam, “Multiresponse optimization of AWJM process parameters on machining TiB2 particles reinforced Al7075 composite using Taguchi-DEAR methodology,” Silicon, 10 (5), 2287-2293, 2018.
  • T Muthuramalingam, S Vasanth, P Vinothkumar, T Geethapriyan, M Mohamed Rabik,  “Multi-criteria decision making of abrasive flow oriented process parameters in abrasive waterjet machining using Taguchi-DEAR Methodology,” Silicon, 10 (5), 2015-2021, 2018.
  • G Sakthivel, D Saravanakumar, T Muthuramalingam “Application of failure mode and effects analysis in the manufacturing industry- an integrated approach with FAHP - FUZZY TOPSIS and FAHP -FUZZY VIKOR ,” International Journal of Productivity and Quality Management, 24(3), 398-423, 2018.
  • T Muthuramalingam, B Mohan, S Vignesh, “Performance Analysis of Pulse Generators on Residual Stress of Machined Silicon Steel Using EDM Process,” Silicon, 10 (5), 1785-1792, 2018..
  • P Nanthakumar, A Rajadurai, T Muthuramalingam,  “Multi Response Optimization on Mechanical Properties of Silica Fly Ash Filled Polyester Composites Using Taguchi-Grey Relational Analysis,” Silicon, 10(4), 723-1729, 2018.
  • T Muthuramalingam, M Mohamed Rabik, D Saravanakumar, K Jaswanth, “Sensor integration based approach for automatic fork lift trucks,” IEEE Sensors, 18(2), 736-740, 2018.
  • M Mohamed Rabik, T Muthuramalingam, “Tracking and locking system for shooter with sensory noise cancellation,” IEEE Sensors, 18(2), 732-735, 2018.
  • K Jaswanth, Ashwin, T Muthuramalingam, “Influence of duty factor of the pulse generator in the electrical discharge machining process,” International Journal of Applied Engineering Research, 12(21), 11397-11399, 2017.
  • T Geethapriyan, R Manoj Samson,T Muthuramalingam,  A C Arunraj, “Stiffness Analysis of Inverted Tripod Parallel Manipulator,” Applied Mechanics and Materials, 867, 205-211, 2017.
  • T Geethapriyan, K Kalaichelvan, T Muthuramalingam, A Rajadurai, “Performance analysis of process parameters on machining α-β titanium alloy in electrochemical micromachining process,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(9), 1577–1589, 2018.
  • G Anbuchezhiyan, B Mohan, D Sathianarayanan, T Muthuramalingam, “Synthesis and characterization of hollow glass microspheres reinforced magnesium alloy matrix syntactic foam,” Journal of Alloys and Compounds, 719(1), 125-132, 2017.Impact factor: 3.133
  • D Saravanakumar, B Mohan, T Muthuramalingam, “A review on recent research trends in servo pneumatic positioning systems,” Precision Engineering, 49(1), 481-492, 2017.Impact factor: 2.237
  • T Muthuramalingam, S Vasanth, T Geethapriyan, “Influence of Energy Distribution and Process Parameters on Tool Wear in Electrical Discharge Machining,”International Journal of Control Theory and Applications, 9(37), 353-359, 2016.
  • T Geethapriyan, K Kalaichelvan, T Muthuramalingam, “Multi Performance Optimization of Electrochemical Micro-Machining Process Surface Related Parameters on Machining Inconel 718 using Taguchi-grey relational analysis,” La Metallurgia Italiana, 2016(4), 13-19, 2016. Impact factor: 0.298
  • T Geethapriyan, K Kalaichelvan, T Muthuramalingam, “Multi Performance Optimization of Electrochemical Micro-Machining Process Surface Related Parameters on Machining Inconel 718 using Taguchi-grey relational analysis,” La Metallurgia Italiana, Accepted for Publication, 2016. Impact factor: 0.227
  • S Vasanth, T Muthuramalingam, P Vinothkumar, T Geethapriyan, G Murali,  “Performance Analysis of Process Parameters on Machining Titanium (Ti-6Al-4V) Alloy Using Abrasive Water Jet Machining Process,” Procedia CIRP, 46(1), 139-142, 2016. SNIP: 0.490
  • T Geethapriyan, K Kalaichelvan, T Muthuramalingam,  “Influence of coated tool electrode on drilling Inconel alloy 718 in Electrochemical micro machining,” Procedia CIRP, 46(1), 127-130, 2016. SNIP: 0.490
  • T Muthuramalingam, S Vasanth, P Vinothkumar, G Murali,  “Effect of pulse duration and flushing pressure on performance measures in EDM process,” Australian Journal of Basic and Applied Sciences, 9 (32), 66-70, 2015. SNIP: 0.230
  • A Ramamurthy, R Sivaramakrishnan, T Muthuramalingam,  S Venugopal,  “Performance analysis of wire electrodes on machining Ti-6Al-4V alloy using wire electrical discharge machining process,” Machining Science and Technology, 19(4) ,577-593,  2015. Impact factor: 0.703
  • A Ramamurthy, R Sivaramakrishnan, T Muthuramalingam, “Taguchi-Grey Computation Methodology for Optimum Multiple Performance Measures on machining Titanium alloy in WEDM Process,” Indian Journal of Engineering and Materials Sciences, 22 (2), 181 – 186, 2015. Impact factor: 0.413
  • T Muthuramalingam, B Mohan, D Saravanakumar, “Evaluation of Surface Finish of Electrical Discharge Machined AISI 304 Stainless Steel With Various Pulse Generators,” Applied Mechanics and Materials, 772 (1), 279 – 283, 2015. SNIP: 0.330
  • D Saravanakumar, B Mohan, T Muthuramalingam, “A study on the influence of system parameters on servo pneumatic system and multi-response optimization using Taguchi – Grey methodology,” Applied Mechanics and Materials, 789 (1), 901-905, 2015. SNIP: 0.330
  • A Ramamurthy, R Sivaramakrishnan, T Muthuramalingam, S Venugopal, “Multi-Response Optimization of Wire -EDM Process Parameters of Titanium Alloy Using Taguchi Method and Grey Relational Analysis,” Applied Mechanics and Materials, 772 (1) , 245 – 249, 2015. SNIP: 0.330
  • A Ramamurthy, R Sivaramakrishnan, T Muthuramalingam, S Venugopal, “Application of Taguchi-Grey relational methodology for multiple optimal performance measures in WEDM process,” Applied Mechanics and Materials, 766- 767 (1) , 861 -866, 2015. SNIP: 0.330
  • S Vignesh, B Mohan, T Muthuramalingam, S Karthikeyan, “Evaluation of Recast layer thickness of Electrical Discharge Machined AISI 202 Stainless Steel With Various Pulse Generators,” Applied Mechanics and Materials, 766- 767 (1) , 518 -522, 2015. SNIP: 0.330
  • T Geethapriyan, GM Gopal, K Kalaichelvan, T Muthuramalingam, “Analyzing the effect of Electrochemical Micromachining process parameters on Alpha-Beta Titanium,” International Journal of Mechanical Dynamics & Analysis, 1(1), 18-22, 2015.
  • T Muthuramalingam, B Mohan, “Application of Taguchi-grey multi responses optimization on process parameters in electro erosion,” Measurement, 54(1) , 495-502, 2014. Impact factor: 1.484
  • T Muthuramalingam, B Mohan, A Jothilingam, “Effect of tool electrode re-solidification on surface hardness in electrical discharge machining,” Materials and Manufacturing Processes, 29(11-12), 1374-1380, 2014. Impact factor: 1.629
  • T Muthuramalingam, B Mohan, “A review on the influence of electrical process parameters in EDM process,” Archives of Civil and Mechanical Engineering, 15 (1), 87 – 94, 2014. Impact factor: 1.793
  • T Muthuramalingam, B Mohan,  A Rajadurai, D Saravanakumar, “Monitoring and fuzzy control approach for the efficient electrical discharge machining process,” Materials and Manufacturing Processes, 29(3), 281-286, 2014. Impact factor: 1.629
  • D Saravanakumar, B Mohan, T Muthuramalingam, “Application of response surface methodology on finding influencing parameters in servo pneumatic system,” Measurement, 54(1), 40-50, 2014. Impact factor: 1.484
  • T Muthuramalingam, B Mohan, “Performance analysis of iso current pulse generator on machining characteristics in EDM process,” Archives of Civil and Mechanical Engineering, 14(3), 383-390, 2014. Impact factor: 1.793
  • T Muthuramalingam, B Mohan,  A Rajadurai, M D Antony, “Experimental investigation of iso energy pulse generator on performance measures in EDM ,” Materials and Manufacturing Processes, 28(10), 1137-1142, 2013. Impact factor: 1.629
  • T Muthuramalingam, B Mohan, “Influence of tool electrode properties on machinability in electrical discharge machining,” Materials and Manufacturing Processes, 28(8), 939-943, 2013. Impact factor: 1.629
  • T Muthuramalingam, B Mohan, “Influence of discharge current pulse on machinability in electrical discharge machining,” Materials and Manufacturing Processes, 28(4), 375-380, 2013. Impact factor: 1.629
  • T Muthuramalingam, B Mohan, “Design and fabrication of control system based iso current pulse generator for electrical discharge machining,” International Journal of Mechatronics and Manufacturing Systems, 6(2), 133-143, 2013. SNIP: 0.258
  • T Muthuramalingam, B Mohan, “A study on improving machining characteristics of electrical discharge machining with modified transistor pulse generator,” International Journal of Manufacturing Technology and Management, 27(1/2/3) , 101-111, 2013. SNIP: 0.330
  • T Muthuramalingam, B Mohan, “Enhancing the surface quality by iso pulse generator in EDM process,” Advanced Materials Research, 622-623(1) , 380-384, 2013. SNIP: 0.158
  • T Muthuramalingam, B Mohan, “Taguchi-grey relational based multi response optimization of electrical process parameters in electrical discharge machining,” Indian Journal of Engineering and Materials Sciences, 20(6), 471-475, 2013. Impact factor: 0.413
  • T Muthuramalingam, B Mohan, “Multi response optimization of electrical process parameters on machining characteristics in EDM using Taguchi-DEAR methodology,” Journal of Engineering and Technology, 3(1), 57-60, 2013. Impact factor: 0.2
  • D Saravanakumar, B Mohan, T Muthuramalingam, “Optimization of Proportional Fuzzy Controller for Servo Pneumatic Positioning system using Taguchi - DEAR Methodology,” Journal of Engineering and Technology, 4(2), 115-118, 2014. Impact factor: 0.2
  • T Geethapriyan, K Kalaichelvan, A.Rajadurai, T Muthuramalingam, S Naveen, “A Review on Investigating the effects of process parameters in electrochemical machining,” International Journal of Applied Engineering Research, 10 (2), 1743- 1748, 2015. SNIP: 0.330
  • T Muthuramalingam, R Parasuraman, B Mohan, “Analysis of machining characteristics with different pulse generators in electrical discharge machining,” Journal of Engineers Today(1), 14, 143-146, 2012.

Funded Projects Involved

  • Involved as Project team member in a project titled as “Optimization of Machining Process applied on Titanium and Aluminum Alloys” Funded by (2000 Australian Dollar) Bharat Forge India, Capral Australia and Deakin University, Australia under the scheme “Industrial Partner projects” along with Dr. Guy littlefair, Auckland University of Technology, New Zealand and  Dr. Moshe Goldberg, Deakin University, Australia during 2018.
  • Involved as Project team member and foreign expertise in a project titled as “Development of Aluminium matrix composites” Funded by (20000 Chinese Yuan) Leshan Normal University, China under the scheme “Leshan Normal University talent introduction project (XJR17003)” along with Dr. Cao Fenghong; Dr. Chen Chang, Leshan Normal University, China and Dr. Wang Zhenyu, Chengdu University of Technology, China during 2018.
  • Involved as Project Investigator in a project titled as “Design and development of UAV” Funded by (260000 Indian rupee) SRM Institute of Science and Technology, Kattankulathur, India under the scheme “Selective Excellence Initiative” along with Dr. Mohamed Rabik, SRM Institute of Science and Technology, Kattankulathur, India during 2018.

Book Chapters/Monographs Published

  • “A Review on the Application of Mechatronics in Manufacturing Processes” Chapter in the book of “Applied Mechatronics and Mechanics: System Integration and Design” Edited by Satya Bir Singh, Prabhat Ranjan, A. K. Haghi, Published by Apple Academic Press, CRC Press, Taylor and Francis, USA, 2019. ISBN: 9781771888899. 
  •  “Recent Trends in Micro and Nano Machining of Engineering Materials” Chapter in the book of “Micro and Nano Machining of Engineering Materials” Edited by Kaushik Kumar, Divya Zindani, Nisha Kumari , Paulo Davim Published by Springer Nature Switzerland, 2019. ISBN: 9783319998992. DOI: https://doi.org/10.1007/978-3-319-99900-5.
  • “Significance of Pulse Generators in Electrical Discharge Machining” Published by LAP Lambert Academic Publishing, Germany, 2015. ISBN: 9783659798030.

Papers Presented 

International Conferences Abroad

  • With Huu Phan Nguyen, Tien Long Banh, Ngoc Pi Vu, Quang Dung Le, Le Xuan Hung, Dinh Khai Nguyen “Taguchi Based Process Parameters Optimization in Vibration Assisted Die Sinking Electrical Discharge Machining,” in Proc. ICERA 2019, Ha Noi, Vietnam, 2019.
  • With Luu Anh Tung, Tran Thi Hong, Nguyen Van Cuong, Le Hong Ky, Nguyen Huu Phan, Le Xuan Hung, and Ngoc Pi Vu, “A Study on Optimization of Manufacturing Time in External Cylindrical Grinding,” in Proc. ICERA 2019, Ha Noi, Vietnam,2019.
  • With L Ganesh Babu, K Sridharan, T Geethapriyan, K P Srinivasan, “Multi-response Optimization of Process Parameters of Inconel 718 Alloy using TGRA Method,” in Proc. ICERA 2019, Ha Noi, Vietnam,2019.
  • With Nguyen Huu Phan, Nguyen Van Duc, Pham Van Bong, Ngoc Pi Vu, Le Xuan Hung, “Multi-responses Optimization of Process Parameters in Die-Sinking EDM Process on SKD11 Steel Using PSI Based Taguchi Method,” in Proc. ICERA 2019, Ha Noi, Vietnam,2019.
  • With Luu Anh Tung, Tran Thi Hong, Nguyen Van Cuong, Le Hong Ky, T Muthuramalingam, Do Duc Trung, Le Xuan Hung, Ngoc Pi Vu, “Optimization of Manufacturing Time in Surface Grinding,” in Proc. ICERA 2019, Ha Noi, Vietnam, 2019.
  • With L Ganeshbabu, S Vasanth, P Karthikeyan, D Saravanakumar, “Flushing pressure automation for Efficient Machining in EDM Process” in Proc. ICCMA 2019, Netherlands, 2019.
  • With D Saravanakumar, S Manoj Srivatsn, G Sakthivel, “Design Optimization of Pneumatically actuated three jaw Gripper using Genetic Algorithm” in Proc. ICCMA 2019, Netherlands, 2019.
  • With S Vishnukumar, NR Sibi, R Balamurugan, S Vasanth, “Machine ability on Leather using CO2 Laser and Power Diode Laser,” in Proc. ICEMMM 2019, Chennai, 2019.
  • With S Vasanth, L Ganesh Babu, “Multi criteria decision making of power diode based process parameters in laser beam machining using Taguchi–DEAR methodology” in Proc. ATINER 2019, Greece, 2019.
  • With G Anbuchezhiyan, “Development And Characterization Of TiC Reinforced Magnesium Nano Composites” in Proc. ICONN 2019, Chennai, 2019.
  • With K Sridharan, B Muthuselvan, A Ramamurthy, “Investigation on the Tribological Properties of Lubricant Oil with Nano-Particle Additives” in Proc. ICONN 2019, Chennai, 2019.
  • With G Anbuchezhiyan, “Analysis of drilling parameters on hybrid metal matrix composites using RSM,” in Proc. ICAME 2018, Turkey, 2018.
  • With S Vasanth, Sanjeev Gupta, “Optimization of cutting parameters in CO2 laser beam machining of buffalo leather using genetic algorithm,” in Proc. ICAME 2018, Turkey, 2018.
  • With A Ramamurthy, K Sridharan, Sanjeev Gupta,  “Experimental investigation and parameter optimization of abrasive water jet machining,” in Proc. ICAME 2018, Turkey, 2018.
  • Single author paper, “Application of response surface methodology on finding influencing parameters over surface roughness in EDM process,” in Proc. Electrophysical Machining in Modern Industry 2017, Russia, 2017.
  • With S Vasanth, P Vinothkumar, T Geethapriyan, G Murali,  “Performance Analysis of Process Parameters on Machining Titanium (Ti-6Al-4V) Alloy Using Abrasive Water Jet Machining Process,” in Proc. HPC 2016, Germany, 2016.
  • With T Geethapriyan, K Kalaichelvan, “Influence of coated tool electrode on drilling Inconel alloy 718 in Electrochemical micro machining,” in Proc. HPC 2016, Germany, 2016.
  • With S Vasanth, P Vinothkumar, G Murali, “Effect of pulse duration and flushing pressure on performance measures in EDM process,” in Proc. ICMME 2015, Bangkok, 2015.
  • With B  Mohan, D Saravanakumar, “Evaluation of Surface Finish of Electrical Discharge Machined AISI 304 Stainless Steel With Various Pulse Generators,” in Proc. ICMMC, Singapore, 2014.
  • With D Saravanakumar, B Mohan, “A study on influence of system parameters on servo pneumatic system and multi-response optimization using Taguchi – Grey methodology,” in Proc. ICMMC, Singapore,2014.
  • With A Ramamurthy, R Sivaramakrishnan, S Venugopal, “Multi-Response Optimization of Wire -EDM Process Parameters of Titanium Alloy Using Taguchi Method and Grey Relational Analysis,” in Proc. ICMMC, Singapore, 2014.

International Conferences in India

  • With K Jaswanth, “Influence of uniform pulse energy on surface hardness in electrical discharge machining process”, in Proc. ICEMMM 2018, Chennai, 2018.
  • With S Vasanth, “A study on machinability of leather using CO2 based Laser Beam Machining process”, in Proc. ICEMMM 2018, Chennai, 2018.
  • With A Ramamurthy, “Analysis of machinability on WEDM processed titanium alloy with coated electrodes”, in Proc. ICEMMM 2018, Chennai, 2018.
  • With T Geethapriyan, S Vasanth, J Thavamani, Vignesh, “Influence of Nanoparticles Suspended Electrolyte on machinability of Stainless Steel 430 using Electrochemical Micro Machining Process”, in Proc. ICEMMM 2018, Chennai, 2018.
  • With G Anbuchezhiyan, B Mohan, “Synthesis and characterization of nano glass particles reinforced AZ91D magnesium alloy composites”, in Proc. ICEMMM 2018, Chennai, 2018.
  • With P Nanthakumar, A Rajadurai, “Dynamic mechanical behaviour of sub micron size fly ash particles filled polyester resin composites”, in Proc. ICEMMM 2018, Chennai, 2018.
  • With T Geethapriyan, K Kalaichelvan, H S Vignesh,“ Optimization of Electro-Chemical Micro Machining Process using Additive Manufactured Tool on Titanium Alloy (Ti-3Al-2.5V) by Taguchi-Grey Method,” in Proc. COPEN-10 2017, Chennai, 2017.
  • With K Jaswanth, K Selvashankar, G Sooryaprakash, S Mahesh, S Vasanth, “Design and development of modified pulse generator for electrical discharge machining,” in Proc. ICARM 2017, Chennai, 2017.
  • With R Prasanna, S Akalya, Ashwin, P Vinothkumar, “Design and development of low-cost direct extruder 3D printer using mechatronics approach,” in Proc. ICARM 2017, Chennai, 2017.
  • With Ravi Akash, R Dilipkumar, K Shravan, S Vasanth, “Influence of process parameters of Laser Beam Machining on machining AISI304 SS,” in Proc. RIPE 2017, Chennai, 2017.
  • With T Geethapriyan, R Manoj Samson, A C Arunraj,  “ Stiffness analysis of inverted tripod parallel manipulator,” in Proc. TAMMIE 2016, Coimbatore, 2016.
  • With T Geethapriyan, A C Arunraj, R Manoj Samson, “ Optimization of machining parameters in wire-cut EDM on pure Titanium using Response Surface Methodology,” in Proc. ICCMEET 2016, Coimbatore, 2016.
  • With G Kumaresan, “Multi dome test of super plastic forming in Magnesium alloy to investigate strain rate sensitivity index,” in Proc. IMagcon 2016, Chennnai, 2016.
  • Single author paper, “Influence of energy distribution on surface hardness in Electrical Discharge Machining,” in Proc. ISCA 2016, Mysuru,2016.
  • With T Geethapriyan, K Kalaichelvan, G Kumaresan, “Experimental Investigation of Electrochemical Machining (ECM) Process Parameters on Micro Holes in Inconel 718,” in Proc. APM 2015, IISc Bengaluru, 2015.
  • With T Geethapriyan, K Kalaichelvan, A Rajadurai,  S Naveen , “A Review on Investigating the Effects of Process Parameters in Electrochemical Machining,” in Proc. ICET 2k15, 2015.
  • With A Ramamurthy, R Sivaramakrishnan, S Venugopal, “Application of Taguchi-Grey relational methodology for multiple optimal performance measures in WEDM process,” in Proc. ICAMME, 2014.
  • With S Vignesh, B Mohan, S Karthikeyan, “Evaluation of Recast layer thickness of Electrical Discharge Machined AISI 202 Stainless Steel With Various Pulse Generators,” in Proc. ICAMME, Chennai, 2014.
  • With B Mohan,  “Fuzzy based computational methodology   pulse generator for improving surface finish in EDM,” in Proc. ICICCA,2013.
  • With R Parasuraman, B Mohan, “Performance evaluation of iso current pulse generator in Electrical Discharge Machining,” in Proc. INCACMA, 2012.
  • With R Parasuraman, B Mohan, “Effect of pulse generators on machining characteristics in electrical discharge machining,” in Proc. INCACMA, 2012.
  • With R Parasuraman, B Mohan, “Effect of tool material in thermal erosion process,” in Proc. INCACMA, 2012.
  • With B Mohan,  “Optimization of material removal rate in EDM process using orthogonal array with regression analysis,” in Proc. SET, 2012
  • With B Mohan,  “Enhancing the surface quality by the iso pulse generator in EDM process,” in Proc. ICMST, 2012.
  • With A Senthilnathan, B Mohan,  “Design and fabrication of pulse generator for micro EDM process, ” in Proc. INCRAME, 2011.
  • With A Senthilnathan, B Mohan,  “Improvement of micro EDM process using high-frequency transistor iso duration discharge current pulse generator,” in Proc. ICGMSM, 2011.
  • With A Senthilnathan, B Mohan,  “Design and fabricaton of iso discharge current pulse generator with servo feed control for micro EDM ,” in Proc. ICMTIC, 2011.
  • With M Anbarasan, “Sensor based automatic pallet pick up fork lift trucks for industrial environment,” in Proc. ICDF,2008.

National Conferences in India

  • With T Geethapriyan, K Kalaichelvan, “Influence of process parameters on machinability of Inconel 718 in Electro chemical micro machining process,” in Proc. NCARMS, 2016.
  • With A Ramamurthy, S Vasanth, M Mohammed Rabik, T Geethapriyan, “Multi response optimization of EDM process parameters using assignments of weight method,” in Proc. NCARMS, 2016.
  • With T Geethapriyan,  K Kalaichelvan, G Madhana Gopal, “Analysis the Effect of Electrochemical Micromachining Process Parameters on Alpha-Beta Titanium,” in Proc. NCMTFC,2015.
  • With K Harishkumar, “A study on energy conservation in industrial drive systems,” in Proc. NCETIME, 2013.
  • With B Mohan, “Experimental investigation of pulse generators in Electrical Discharge Machining,” in Proc. NCETIME, 2013.
  • With R Parasuraman, B Mohan, “Analysis of machining characteristics with different pulse generators in electrical discharge machining,” in Proc. NCCAME, 2012.
  • With M Chandramohan, “Reactive power compensation of the lighting system to improve the power factor in industries,” in Proc. NCETIME, 2011.
  • With M Anbarasan, “Sensor based pallet pick up fork lift trucks for intelligent material handling,” in Proc. NCRTES, 2011.
  • With A Senthilnathan, B Mohan, “High-efficiency pulse generator for micro EDM process,” in Proc. NCRTES, 2011.
  • With M Chandramohan, “Energy auditing and conservation in aerospace industry,” in Proc. NCETIME, 2011.
  • With B Mohan,   “PWM aided switching for producing spark in micro EDM,” in Proc. NCETIME, 2011.
  • With M Chandramohan, “Energy utilization of electric drives by adopting conservation techniques in industries,” in Proc. NCETIME, 2011.
  • With M Anbarasan, “Evolving colour based segregate material handling,” in Proc. NCRTIME, 2011.
  • With B Mohan, “Pulse parameter analysis of thermo electric process,” in Proc. NCETIME, 2011.
  • With M Anbarasan, “Path detection robot of an automated guided vehicle by IR sensor,” in Proc. NCETIME, 2011.
  • With M Anbarasan, “Automatic fork lifter for variable pallet pick up using the colour sensor,” in Proc. AIRPAM,2008.

Workshops Attended

  • Two weeks “Faculty Industry Immersion Program (FIIP)” at Visteon Automotive Electronics, Chennai on December, 2018.
  • Two days workshop on Advanced Materials Characterization and Techniques held at CEG campus, Anna University, Chennai on February 23-24, 2015.
  • Faculty Development Program on Applied Hydraulics and Pneumatics held at Madras Institute of Technology, Anna University, Chennai on June 4-10, 2012.
  • Faculty Development Program on Engineering Materials and Metallurgy held at Madras Institute of Technology, Anna University, Chennai on December 5-12, 2012.
  • Faculty Development Program on Applied Hydraulics and Pneumatics held at Madras Institute of Technology, Anna University, Chennai on June 13-19, 2011.
  • Advance training programme on Programmable systems on chip (PSoC) based embedded control system held at Advanced Training Institute(Government of India), Chennai on June 27- July 1, 2011.
  • Advance training programme on CNC programming and machining on 4 axis die sinker EDM (For tool & die making) held at Advanced Training Institute(Government of India), Chennai on September 05 – 16, 2011
  • Faculty Development Program on Introduction to Finite Element Analysis held at Madras Institute of Technology, Anna University, Chennai on December 1- 7, 2011.
  • Staff Development Program on Robotics for Manufacturing held at Madras Institute of Technology, Anna University, Chennai on December 10-23, 2011.

Academic Experiences

  • Associate Professor, Department of Mechatronics, School of Mechanical Engineering, SRM University, 2018-Till now
  • Assistant Professor, Department of Mechatronics, School of Mechanical Engineering, SRM University, 2014-2017
  • JRF(FT) and visiting faculty(PT), Department of Production Technology, MIT Campus, Anna University, 2010-2014
  • Lecturer, Prathyusha Institute of Technology and Management, 2009-2010

Other Professional Experiences

  • Application Engineer, Kamalam Group of Company, 2006-2008.
  • Research Forum Organizer, Department of Production Technology, MIT Campus, Anna University, 2010-2013
  • Maintenance Manager, Kamalam Group of Company, 2013-2014
  • Scrutiny Committee Member - NCMTFC 2015 conducted by SRM Institute of Science and Technology (formerly known as SRM University), India
  • General Chair Member - EPEE 2016, Thailand

Achievements and Awards

  • Best research paper award at ICEMMM 2018, Chennai, India.
  • Best research paper award at RIPE2017, Chennai, India.
  • Gold medalist during SRM research day 2017,  Chennai, India.
  • Outstanding reviewer award from “archives of civil and mechanical engineering” by Elsevier
  • Best research paper award at NCARMS2016, Chennai, India.
  • Gold medalist during SRM research day 2016,  Chennai, India.
  • Best research paper award at ICMMC2014, Singapore.
  • Anna Centenary Research Fellow 2011, India.

Journal Positions held

As Editorial board member:

  • SAE Tech papers
  • International journal of manufacture system and design - published by Journalspub
  • International Journal of Production Engineering - published by Journalspub

As Associate Editorial board member:

  • Open Materials Science Journal - published by Bentham Open

As Reviewer:

  • SN applied Science - published by Springer
  • IEEE sensors – published by IEEE
  • Transactions of the Canadian Society for Mechanical Engineering
  • Sensors and Actuators A: Physical – published by Elsevier
  • Measurement - published by Elsevier
  • Materials Performance and Characterization – Published by ASTM
  • Ain Shams Engineering Journal- published by Elsevier
  • Alexandria Engineering Journal- published by Elsevier
  • Archives of Civil and Mechanical Engineering - published by Elsevier
  • Engineering Science and Technology, an International Journal - published by Elsevier
  • Indian Journal of Engineering and Materials Sciences – published by Niscair
  • Journal of Engineering Manufacture - published by Sage
  • Journal of Process Mechanical Engineering - published by Sage
  • Journal of Power and Energy systems - published by Elsevier
  • Machining Science and Technology - published by Taylor & Francis
  • International Journal of Heat and Mass Transfer - published by Elsevier
  • Materials and Manufacturing Processes - published by Taylor & Francis
  • SpringerPlus – published by Springer
  • Silicon – published by Springer
  • Microsystems Technologies - published by Springer
  • Transactions of the Indian Institute of Metals – published by Springer
  • Advanced Materials Research – published by Trans Tech publication

Conference Positions:

As Coordinator:

  • ICARM 2017 conducted by SRM University, India

As Scrutiny committee member:

  • NCMTFC 2015 conducted by SRM University, India.

As Session Chairman

  • In Foreign
    • ICERA 2019 conducted by TNUT, Hanoi, Vietnam
    • ATINER 2019 conducted by ATINER, Athens, Greece
    • ICMME  2015 conducted by IPN Thailand chapter at Bangkok, Thailand
  • In India:
    • NCARMS 2016 conducted by MIT, Anna University, Chennai, India
    • AUTOHUNT 2K15 conducted by BSA University, India
    • ETME 2K15 conducted by SRM engineering college, India

As Technical Committee member:

  • AMTIA 2016, China
  • EAME 2015, Thailand
  • CMSE 2015, China
  • IRP
  • IACSIT
  • IPN Thailand chapter