Mr. Veeranaath V.

Mr.Veeranaath V.
Mr.Veeranaath V

Assistant Professor
Area: Manufacturing Engineering
Affiliation: School of Mechanical Engineering, Kattankulathur Campus, SRM Institute of Science and Technology (formerly known as SRM University).
E-mail: veeranav@srmist.edu.in

Education
Ph.D (Pursuing) Nano Manufacturing SRM Institute of Science and Technology
M.Tech. Computer Integrated Manufacturing SRM Institute of Science and Technology (formerly known as SRM University), 2014
B.Tech. Mechanical Engineering Pondicherry University, 2010

Other Details:

Courses

  • Elements of Mechatronics
  • Fluid Power Control
  • Metrology and Quality Control
  • Computer Aided Manufacturing
  • Materials Technology
  • Introduction to manufacturing engineering
  • Group Technology and Cellular Manufacturing
  • Basic Mechanical Engineering.

Research Interests

  • Nano composites
  • Tool Engineering
  • Optimization

Selected Publications

  • V Veeranaath, Aakash Anshuman, Suryaansh Sethia, “Experimental Study and Finite Element Analysis of the Impact of Tool Edge Geometry in Orthogonal Machining of Super Alloy Inconel 718”, IOP conference series: Material science and Engineering, Vol. 912, Issue 03 – 2032, Sep 2020, Scopus Indexed – SNIP – 0.532
  • V Veeranaath, Ritik Kumar Das, Sushil Kumar Rai, Sukhveer Singh, Prabudh Sharma, “Experimental Study and Optimization of Residual Stresses in Machining of Ti6Al4V Using Titanium and Multi-layered Inserts”, IOP conference series: Material science and Engineering, Vol. 912, Issue 03 – 2028, Sep 2020, Scopus Indexed – SNIP – 0.532
  • V.Veeranaath, “Multi Variate Optimization of the Influence of Edge Geometry in Orthogonal Machining of Ti6Al4V Using PCBN Inserts by Taguchi and Grey Relational Analysis”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 10, Issue 3, Jun 2020, 9–20, Scopus Indexed – SNIP – 0.208
  • V.Veeranaath, “Optimization of Processing Parameters on Physical and Mechanical Properties of Copper-CNT Nanocomposites”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 10, Issue 3, Jun 2020, 705–716, Scopus Indexed – SNIP – 0.208
  • V Srinivasan, V Veeranaath, J Santhakumar, “Improving the efficiency of the Process and Safety by Low-Cost Automation”, International Journal of Psychosocial Rehabilitation, Vol. 23, Issue 3, pp. 157-167, May 2019, Scopus Indexed – SNIP – 0.155
  • Veeranaath V, “Finite Element Prediction of Process Parameters Influence in Orthogonal Machining of Ti6Al4V with TiC Coated PCBN Inserts”, Materials Today: Proceedings, Elsevier Publication, ISSN 2214-7853, Volume 5, 2018, pp. 19547–19554, Scopus Indexed, SNIP 0.837
  • Veeranaath V, Satyabrat Kar, Abinash Pradhan, Ayush Sharma, “Experimental and Finite Element Analysis on Machining of Ti6Al4V using Dual Layer Coated Carbide Inserts”, IOP Conference Series: Material Science and Engineering, Volume 402, Issue 1, 2018, Scopus Indexed, SNIP 0.573
  • Murugesan R, Veeranaath V, “Influence of Cutting Parameters on Tool Wear and Surface Roughness in Machining SS304 using Carbide and Ceramic Inserts”, ARPN Journal of Engineering and Applied Sciences, ISSN 1819-6608, Volume 13, November 2018, pp. 8625 – 8632, Scopus Indexed, SNIP 0.473
  • Murugesan R, Baskar B, Veeranaath V, “Demand Capturing Mechanism Using SAP”, International Journal of Mechanical Engineering and Technology, ISSN 0976-6340, Volume 9, Issue 5, May 2018, pp. 283–298, Scopus Indexed, SNIP 0.119
  • Arunprasath S, Veeranaath V, “Air Brake System Using the Application of Exhaust Gas in IC Engines”, Journal of Chemical and Pharmaceutical Sciences, ISSN 0974-2115, Volume 10 Issue 4, October – December 2017, Scopus Indexed, SNIP 0.353
  • Veeranaath V, Arunprasath S, “Development of Autonomous Navigation and Obstacle Avoidance Vehicle”, Journal of Chemical and Pharmaceutical Sciences, ISSN 0974-2115, Special Issue Volume 2, February 2017, Scopus Indexed, SNIP 0.353
  • Veeranaath V, “A Study on Influence of Process Parameters on Tool Wear of PVD Coated Cutting Tools in Orthogonal Machining of Al6351: A Finite Element Analysis”, Indian Journal of Science and Technology, ISSN 0974-6846, Volume 9(47), December 2016, Scopus Indexed, SNIP 1.270 
  • Murugesan R, Thanikachalam R, and Veeranaath V, “Intelligent multi-line lubricating mechanism based on temperature monitoring system”, International Journal of Applied Engineering Research, ISSN 0973-4562, Volume 11, Number 9 (2016) pp 6603-6606 Scopus Indexed, SNIP 0.484

Papers Presented

  • V Veeranaath, Aakash Anshuman, Suryaansh Sethia, “Experimental Study and Finite Element Analysis of the Impact of Tool Edge Geometry in Orthogonal Machining of Super Alloy Inconel 718”, International Conference on Advances in Mechanical Engineering (ICAME-2020), February 24-29, 2020, SRM Institute of Science and Technology, Kattankulathur, Chengalpattu Dt.
  • V Veeranaath, Ritik Kumar Das, Sushil Kumar Rai, Sukhveer Singh, Prabudh Sharma, “Experimental Study and Optimization of Residual Stresses in Machining of Ti6Al4V Using Titanium and Multi-layered Inserts”, International Conference on Advances in Mechanical Engineering (ICAME-2020), February 24-29, 2020, SRM Institute of Science and Technology, Kattankulathur, Chengalpattu Dt.
  • Veeranaath V, Satyabrat Kar, Abinash Pradhan, Ayush Sharma, “Experimental and Finite Element Analysis on Machining of Ti6Al4V using Dual Layer Coated Carbide Inserts”, International Conference on Advances in Mechanical Engineering (ICAME-2018), March 22-24, 2018, SRM Institute of Science and Technology, Kattankulathur, Kanchipuram Dt.
  • Veeranaath V, “Finite Element Prediction of Process Parameters Influence in Orthogonal Machining of Ti6Al4V with TiC Coated PCBN Inserts”, International Conference on Materials Processing and Characterization (ICMPC-2018), March 16-18, 2018, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad
  • Veeranaath V, Elansezhian R and Santhakumar J, “Study on tool wear and tool life prediction of PVD coated cutting tools: A Finite Element Analysis”, International Conference on Design, Analysis, Manufacturing and Simulation (ICDAMS-2013), March 21-22, 2013, Saveetha University, Chennai
  • Srinivasan V, Veeranaath V, Santhakumar J, “Improving efficiency of the process and safety by Low-Cost Automation”, National Conference on Emerging Trends in Mechanical Engineering (NCETIME-2013), February 21, 2013, Aksheyaa College of Engineering, Kanchipuram
  • Veeranaath V, Aravindan R, Vedha T, Elansezhian R, “Effects of the feed rate and cutting speed on the cutting tool stresses in machining of Aluminum 6351 alloy”, National Conference on Recent Trends in Design and Manufacturing for Sustainability (RTDMS-2010), March 19-20, 2010, Sri Ramakrishna Engineering College, Coimbatore
  • Veeranaath V, Vedha T, “Advanced Trends in I.C.Engines”, Confluence on Innovative Mechanical Engineers (COIME-2009) – National Level Technical Symposium, March 26-27, 2009, Bharathiyar College of Engineering and Technology, Karaikal

Work in Progress

  • With Arunprasath S, "Fabrication, Characterization and Finite Element Modelling of Aluminum based hybrid composites"
  • With Sai Krishna and Nitheesh S. K, “Machinability of superalloys using carbide inserts”

Academic Experience

  • Assistant Professor (O.G), Department of Mechanical Engineering, SRM Institute of Science and Technology, Kattankuathur, July 2014 – Till Date.

Other Professional Experience

  • Engineer – Grade: B1, Manufacturing Engineering Department (MED), Lucas TVS Ltd., Pondicherry Division, July 2010 – July 2012.

Workshops /Seminars/Conferences

  • Participated in the five days Webinar Series on “Best Practices in Higher Technical Education” organized by Department of Computer Science and Engineering in association with SRM Centre for Applied Research in Education (SRM-CARE) held from 30th June 2020 to 04th July 2020
  • Participated in a one-week Faculty Development Program (FDP) on “Advanced Material Research” organized by Department of Science and Humanities, Bharat Institute of Engineering and Technology, Chennai from 15th to 19th June 2020
  • Participated in two days online workshop on “Patent Drafting and Processing with Importance of Trademark and Copyright” organized by Journal of Advanced Engineering Research and powered by Hexacube India, on 06th and 07th May 2020
  • Participated in three days online workshop on “Design of Experiments: An Engineering Perspective” organized by Journal of Advanced Engineering Research and powered by Hexacube India, on 22nd, 23rd and 24th April 2020
  • Participated in two days workshop on “Composites” at Department of Mechanical Engineering, SRM Institute of Science and Technology, Kattankulathur on 24-25th February 2020
  • Participated in the two days workshop on “Recent Trends in Metal Additive Manufacturing” at Department of Mechanical Engineering, SRM Institute of Science and Technology, Kattankulathur on 21-22nd November 2019
  • Participated in the five days workshop on “Optimization Techniques in Engineering Design and Applications” at Department of Mechanical Engineering, SRM Institute of Science and Technology, Kattankulathur on 09-13th September 2019
  • Participated in two days workshop on “Recent Advances in Computational Techniques for Characterizing Nanomaterials” at Department of Mechanical Engineering, SRM Institute of Science and Technology, Kattankulathur on 23-24th August 2019
  • Participated in the two days workshop on “Stir Casting and Solid-State Welding” at Department of Mechanical Engineering, SRM Institute of Science and Technology, Kattankulathur on 29-30th July 2019
  • Participated in the five days workshop on “Advanced Material Characterization” at Department of Textile and Automobile Engineering, PSGTECHS COE INDUTECH, Coimbatore on 10-14th June 2019
  • Participated in the two days workshop on “Design of Experiments (DOE)” at Department of Mechanical Engineering, SRM Institute of Science and Technology, Kattankulathur on 7-8th February 2019
  • Participated in a two days workshop on “Advances in Nanotechnology” at Department of Metallurgical and Materials Engineering, IIT Madras on 22-23rd December 2018
  • Participated in the three days FDP on “Recent Development in Optimization (RTIO)” at Department of Mechanical Engineering, SRM Institute of Science and Technology, Kattankulathur on 6-8th December 2018
  • Participated in the two days workshop on “Recent Development in Metal Forming and its Research Aspects” at Department of Mechanical Engineering, SRM Institute of Science and Technology, Kattankulathur on 29-30th November 2018
  • Participated in a one-day workshop on “Current Trends in Metal Joining Processes” at Department of Mechanical Engineering, SRM Institute of Science and Technology, Kattankulathur on 10th October 2018
  • Participated in one day FDP on “Exploring Patent Filing Aspects” at Department of Mechanical Engineering, SRM University, Kattankulathur on 4th December 2017
  • Participated in one day FDP on “Intellectual Property Rights and Industrial Applications” at Department of Mechanical Engineering, SRM University, Kattankulathur on 8th November 2017
  • Participated in one day FDP on “Insights into Research” at Department of Mechanical Engineering, SRM University, Kattankulathur on 29th June 2017
  • Participated in one day FDP on “Micro and Nano Manufacturing” at Department of Mechanical Engineering, SRM University, Chennai on 19th May 2017
  • Participated in one day FDP on “Intellectual Property Rights and Innovations” at Department of Mechanical Engineering, SRM University, Kattankulathur on 6th January 2017
  • Participated in short term course on “Development, Manufacturing and Analysis of Advanced Composites” at Department of Mechanical Engineering, SRM University, Chennai on 19th December 2015 and 19-24th December 2016
  • Participated in the National Level Workshop on “Material Characterization and Testing (NWMCT 2016)” at Department of Mechanical Engineering, Sathyabama University on 20th February 2016
  • Attended a one-day workshop on “Titanium Matrix Composites” at IIT Madras on December 2014
  • Attended training on “Basic Pneumatics” at Festo Controls Pvt. Ltd., Chennai on August 2012
  • Attended training programs on “TS/IS 16949, Lean Manufacturing, Six Sigma Concept, Process FMEA, Poka-Yoke, Special Process Knowledge, APQP & Team Building” at M/S Lucas TVS Ltd
  • Attended a workshop on “Strengthening Culture & Values in Education” at Pondicherry Engineering College

Memberships

  • The Institution of Engineers (India), 2019
  • IAENG – International Association of Engineers, 2008
  • Member in Indian Science Congress Association (ISCA)